QUICKGUIDE
SPECTRAN V5
1
2
3
8
9
10
4
5
6
7
14
15
16
17
18
13
12
11
1
2
3
4
5
6
7
8
9
10
13
12
11
Sync In/Output or Powermeter
(not implemented yet)
50 Ohm RF input
Tracking generator output
(not implemented yet)
The LED flashes green/red while the device is
booting and blinks orange while the device is
powered up.
Turns the device on. The screen remains black
for about 15 seconds, while the device is boot-
ing. It is ready for use after the „beep“ sound.
Clear data and change settings.
Scroll button, controls the cursor and activates
functions.
Red - battery is charging
Green - battery is fully charged
Configurable button (not implemented yet)
Open the main menu.
Make sure that the fan is never obstructed, else
the device might not be cooled sufficiently
Speakers for demodulation
For headphones, ear-buds or speakers.
Powermeter
RF Input
Tracking Generator
Power-LED
On/Off Button
Clr/Undo Button
Scroll Button
Charge-LED
Custom Button
Menu Button
Fan cooler
Speaker R/L
2,5mm Audio Plug
Mini-USB port for printer, storage, GSM, WLAN
connections.
Ultra fast (4x3GSPS) Aaronia I/O connector.
Supports Aaronia micro SDHC cards with more
than 10MB/s (not implemented yet)
Only use the original Aaronia Power Adapter
(5.5V, 6A/33W).
Mini-USB port for the direct connection to a PC
USB Slave
Aaronia UHSC port
µSD Slot
Power Connector
USB Master
14
15
16
17
18
IMPORTANT:
Always keep the
fan clear of obstructions or you
might cause the device to over-
heat, which can result in damage
to the device.
In order to use the docking station correctly,
note that the device must be properly placed
in the docking station. The „A“ of SPECTRAN
should only be half-visible, the “e” of Analyzer
should be completely visible.
Back
Side
Bottom
*Optional Docking Station
