3
"Configure Mode" will be displayed on the upper screen for a few seconds, after
which the "Machine" type parameter will be displayed. At this point, the left and right
rectangular buttons may be used to select one of many parameters to be displayed and/or
modified. The top and bottom rectangular buttons may be used to increment and
decrement each parameter; holding a button will cause its action to repeat automatically
(e.g. increment repeatedly). Pressing the Green button will cause changes to the
parameters to be saved.
As an operator, you may change the following parameters: "Radio Perform.",
"Auto-off", "Layout", "Splash Duration", "Shift Button", "Logo", "Brightness" and
"Light". Other parameters might be available depending on the version of software that
you are using. More information about these parameters may be found in the Installation
and Service Manual.
