26
RSMV Technical Guide
APPENDIX A: CONDENSER OPTIONS
Single Condenser Configuration
Figure 6:
Prism 2 Condenser Configuration - Single Condenser Per Module
Single Condenser Per One Module
In Single Condenser Per One Module wiring configuration, the
Condenser Signal is wired to AO2 and the Condenser Relay (RLY3)
is enabled. Refer to
Figure 6
, below for Prism 2 configuration.
Modular Service Tool Screen
RSMV Condenser Options
Configuration Screen
RSM#1-4 CONFIGURATION
Condenser Options
1 Cond per 1 RSMV
USE < or > TO CHANGE
Select the “1 Condenser per 1 RSMV” option on the above Hand
Held Service Tool Screen.
Summary of Contents for RSMV ASM01686
Page 1: ...RSMV Technical Guide ...
Page 31: ...31 RSMV Technical Guide NOTES ...
