A&D UC-321 Instruction Manual Download Page 1

1WMPD4000285B

Precision Health Scale

Model  UC-321

Before Use
Precautions ................................... 1
Scale Components ........................ 2
Display Symbols ............................ 3
Installing (or Replacing) Batteries .. 3

Operations
Basic Measurement ....................... 4
Memory Function ........................... 6
Target Function .............................. 8
BMI Indication .............................. 10
Measuring Your Weight on a Carpet . 12

References
Specifications ............................... 13
Maintaining the Scale ................... 13
Before Requesting Service ........... 13

Precautions

Please read this booklet before using your scale.
Place your scale on a solid level surface, such as tile, wood, or
laminate flooring.
Do not place your scale on a soft, wet or slippery floor. If the scale
must be used on a carpet, be sure to attach the plastic add-on feet as
shown on page 12.
Your scale contains delicate, high-precision parts. Avoid extremes in
temperature, humidity, direct sunlight, shock, moisture and dust.
Do not step on your scale with your feet wet. Be sure that your feet
are dry to prevent slipping and serious injury.

   Step on the center portion of your scale gently.

Do not step on the display window.
Do not open the case of the scale.
Holding the measurement switch for extended periods will shorten battery life.

Indications for Use

The UC-321 is designed for adult use at home.

Compliance with European Directive

The scale complies with the statutory EMC (Electromagnetic Compatibility) directive 2004/
108/EC. 

Note: The displayed value may be adversely affected under extreme

electromagnetic influences.

Summary of Contents for UC-321















Reviews: