
15
7. Place the calibration weight with the same value
as displayed on the weighing pan, and wait for
the STABLE indicator to turn on.
8. Press the TARE key. The scale calibrates SPAN and
“
end
” is displayed.
After displaying “
Cal
”, the setting is
complete.
9. To finish the setting procedure, press the ZERO
1
key or
the CAL switch. The indicator turns the power off.
Note: If the scale will be moved to another location, set the gravity acceleration
value for the new location and calibrate the scale according to the procedure
above. Refer to the previous section to set the gravity acceleration value.
Press
Summary of Contents for SW-D
Page 26: ...24 World map ...