20
11. FUNCTION SETTINGS
The scale has function settings to specify the scale performance.
The parameters set in the function settings are maintained even if the power is turned
OFF.
11.1. Setting the parameters
1. Turn the power OFF.
2.
Touch
and hold the
TARE
switch and
touch
the
switch to turn the power ON. The
software version is displayed.
“
∗∗∗
” indicates the software version number.
3. After about one second, the item is displayed.
4. Change the item or parameter using the following switches.
UNITS
To display the next item.
SAMPLE
To increase the value of the blinking
digit by one (to change the parameter).
When the parameter is changed,
the STABLE indicator turns off.
5.
Tap
the
TARE
switch to store the setting value.
After displaying “
end
”, the scale goes to the weighing
mode.
To cancel the setting procedure without storing the value,
touch
and hold the
switch to turn off the scale.
Item
Parameter
While
touching & holding,
Touch
Tap
When changed
Tap
Summary of Contents for SJ-3000WP
Page 1: ...SJ 3000WP SJ 6000WP SJ 15KWP SJ 30KWP 1WM PD4002705A...
Page 30: ...28 World map...
Page 31: ......
