A&D FX-iWP Series Page 71 Instruction Manual Download

Page: 71 / 79

AD-8920 Remote display

Connected to the FX-

series balance using the RS-232C serial interface to display the

weight data away from the balance.

AD-8922 Remote controller

Connected to the FX-

series balance using the RS-232C serial interface to display the

weight data and to remotely control the balance.

Analog output and comparator output available as an option to be installed.

AD-8121B Printer

Compact dot-matrix printer
Statistical function, clock and calendar function, interval

print function, graphic print function, dump print mode

  5 x 7 dots, 16 characters per line
  Print paper (AX-PP143, 45 (W) x 50 (L) mm , ø65 mm)
  AC adapter or alkaline battery.

Note
When connecting the remote display, remote controller, or printer to the FX-

series

balance using the cable provided with each device, the balance does not comply with IP65.

Summary of Contents for FX-iWP Series
















































































Search results

Summary of Contents for FX-iWP Series

Reviews:

Related manuals for FX-iWP Series

Brands by name

Popular brands

A&D FX-iWP Series, Instruction Manual

Search results

Summary of Contents for FX-iWP Series

Reviews:

Related manuals for FX-iWP Series

Brands by name

Popular brands