P-3/4
AD-8920 REMOTE DISPLAY INSTRUCTION MANUAL
（日本語の取扱説明書は反対面をご覧ください。）
1. Introduction
The AD-8920 is a remote display that uses vacuum fluorescent display technology. It displays the weighing
data transmitted by an A&D manufactured weighing instrument using RS-232C or current loop. Applicable
weighing instruments (electronic balances/platform scales) are listed below. When the output connector of the
weighing instrument is of the DIN type, an optional DIN conversion cable is required.
What the package contains
Table 1 Applicable instruments and required options (As of August, 2007)
・
AD-8920 main unit
Using RS-232C
Using current loop
・
Communication cable (Approx. 1 m)
Weighing
instrument On instrument
On AD-8920
On instrument
On AD-8920
・
AC adapter
AD-4212A/B
None (D-SUB25)
None Not
applicable
EK-G,EW-G
OP-03(D-SUB25)
None OP-05(DIN7) OP-01
EK-H OP-03H(D-SUB25)
None
OP-05H(DIN7)
OP-01
EK-i,EW-i
None (D-SUB9)
None
Not applicable
・
Instruction manual (this leaflet)
ET-W OP-03W(D-SUB25)
None
OP-05W(DIN7)
OP-01
FC-i
None (D-SUB9)
None
Not applicable
FG
OP-03(DIN7)
OP-01
OP-05(DIN7) OP-01
Options (Sold separately)
FG-M/L
OP-23(DIN8)
OP-01
Not applicable
・
OP-01
DIN conversion cable
(Approx. 25 cm)
FP OP-03(D-SUB25)
None
OP-03 or
OP-04(DIN7)
OP-01
FS
OP-03(DIN7)
OP-01
Not applicable
FX-i
None (D-SUB9)
None
Not applicable
Connection diagram
GH,HR-i
None (D-SUB9)
None
Not applicable
GR
None
(D-SUB25)
None
Not applicable
GX,GF, GP,
GX-K
None
(D-SUB25)
None
OP-04 or
OP-06(DIN7)
OP-01
HA-M
OP-03(D-SUB25)
None
OP-03(DIN7) OP-01
HA-A OP-03(D-SUB25)
None
OP-03 or
OP-04(DIN7)
OP-01
HC-i
OP-03(DIN8)
OP-01
Not applicable
HF,HM OP-03(D-SUB25)
None
OP-03 or
OP-05(DIN7)
OP-01
HP OP-03(D-SUB25)
None
Either one of
OP-03,OP-04,
OP-05,OP-06,
(DIN7)
OP-01
HR OP-03(D-SUB25)
None
OP-03 or
OP-05(DIN7)
OP-01
HV-G
HW-G
None (DIN8)
OP-01
Not applicable
HX None
(D-SUB25)
None
OP-04 or
OP-05(DIN7)
OP-01
2. Preparation
2-1. Setting the weighing instrument
Table 2 List of instrument settings
Item Setting
Description
Data output mode Stream mode
Outputs the weighing data continuously.
Baud rate
2400bps or 600bps
AD-8920 recognizes the baud rate automatically.
Length, Parity bit
7 bits-even, 7 bits-odd, or 8 bits-none
AD-8920 functions correctly with any one of those listed.
Stop bits
1 bit or 2 bits
AD-8920 functions correctly with either one.
Terminator
<CR> or <CR><LF>
AD-8920 functions correctly with either one.
Data format
A&D standard format
CTS control
No control of CTS, RTS
Output (hardware) RS-232C or current loop
AD-8920 recognizes the output mode automatically.
Note) The available items depend on the weighing instrument. (An item is not available when the setting is fixed.)
For a detailed description of the settings, refer to the instruction manual of each weighing instrument.
2-2. Connecting the AD-8920
1.Confirm that the AC adapter is of the correct type. 2.Refer to the Table1 shown above to connect the
communication cable correctly. Use the OP-01 DIN conversion cable when the output connector on the
weighing instrument is of the DIN type. 3.Refer to the connecting diagram shown above to connect the
AD-8920 to the weighing instrument by the communication cable.
D-SUB9/D-SUB25 output
Weighing
instrument
Communication cable
AC adapter
AD-8920 main unit
1WMPD4000178C
