18
6..3
3
M
Me
ette
er P
Prro
oc
ce
es
ss IIn
nffo
orrm
ma
attiio
on ((P
PII)) s
sc
crree
en
ns
Based on meter configuration, different parameters may be displayed in the
Process Information (PI) screen by moving the control joystick (see
Figure
7
)
Up
or
Down (DN)
. Process Information screens can be configured to be
static or dynamic (see
Section 6.4.13.2
“Display and Process Information
(PI) Screens”). Using PI Screen Mask settings, the user can enable
(unmask) or disable (mask) up to 6 different process information
combinations.
FIGURE 7: JOYSTICK
In the Static Mode, moving the joystick
Up
pages through the PI screens in
the forward direction, while moving the joystick
DN
pages through the PI
screens in the reverse direction. When the last PI screen is reached, the
firmware “wraps around” and scrolls to the initial PI screen once again.
In the Dynamic Display Mode, the firmware initiates automatic screen
sequencing with user-adjusted screen Cycle Time (see
Section 6.4.13.2
“Display and Process Information (PI) Screens”). When the last PI screen is
reached, the firmware “wraps around” and scrolls to the initial PI screen
once again.
Press here for
Enter
command
UP
RIGHT
LEFT
DOWN
