aakar AAKARv2, User Manual

Page: 30 / 45

WORKING TABLE (BED CALIBRATION)
If the build plate is too far away from the nozzle your 3D-print might not stick to the build plate. Equally, if you adjust the
build plate too close to the nozzle, the build plate can block the filament from extruding from the nozzle. It can also scratch
the build plate.
!!! The machine always comes as calibrated. No calibration is usually necessary to start printing.
If your machine got mis-calibrated in transport, follow the instructions below.
Right-back levelling
screw
Right-front levelling
screw
Left levelling screw
Removable glass build
plate
PCB heater plate
X-Axis rails