Aaeon IMBA-Q17A, Manual

Page: 38 / 44

3-8
IMBA-Q170A
Fan Out Step Up Time [10]
Determines the amount of time Fan Out takes to increase its value by one
step. Input value range: [0~255]
Fan Out Step Down Time [10]
Determines the amount of time Fan Out takes to decrease its value by one
step in intervals of 0.1 seconds. Input value range: [0~255]
The following items appear only when you set
Fan Control Mode
to [Speed
Cruise Mode].
Target Speed [0]
Input value range: [0~4096]
Speed Tolerance [2]
Input value range: [0~64]
Fan Out Step Up Time [10]
Input value range: [0~255]
Fan Out Step Down Time [10]
Input value range: [0~255]
3.3.7 USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating
systems (OS).
[Disabled] USB devices are only available when running BIOS Setup.
[Auto] Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
3.3.8 Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DIO Port1~Port4 [Output], DIO Port5~Port8 [Input]
Configuration options: [Input] [Output]
The following item appears only when you set DIO Port1~8 to [Output].