3-9
Chapter 3: BIOS setup
DIO Port 5~8 [Input]
Set DIO data flow as Input or Output. Configuration options: [Input] [Output]
3.4
Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1
North Bridge
Primary Display [IGD]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCIe]
Primary IGFX Boot Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [HDMI1] [eDP/LVDS] [CRT]
PCIe Speed [Auto]
Allows you to configure the PCIe speed. Configuration options: [Auto] [Gen1]
[Gen2]
LVDS Panel Support [Enabled]
Enables or disables LVDS panel support. Configuration options: [Disabled] [Enabled]
LVDS Color Depth [24-bit]
Select the color depth of the LCD panel to be used as display. Configuration options: [24-bit]
[18-bit]
LVDS Channel Type [Single]
Select the channel type of the LCD panel to be used as display. Configuration options:
[Single] [Dual]
LVDS Brightness Type [Normal]
Allows you to select the LVDS brightness type. Configuration options:
[Normal]
[Inverted]
LVDS Brightness Level [80%]
Allows you to select the LVDS brightness level. Configuration options: [0%] ~
[80%] [90%] [100%]
IGD Flat Panel [1024x768]
Configuration options: [640x480] [800x600] [1024x768] [1280x1024] [1440x1050]
[1440x1050] [1600x1200] [1366x768] [1680x1050] [1920x1200] [1440x900]
[1600x900] [1024x768] [1280x800] [1920x1080] [2048x1536]
