3-4
EMB-APL1
3.3.4
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is
detected, the item shows
None
.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy
operating systems (OS).
[Disabled]
The USB devices can be used only for the BIOS setup
program.
[Auto]
Allows the system to detect the presence of USB
devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected,
the legacy USB support is disabled.
3.3.5
Hardware Monitor
Smart Fan Configuration
CPU Smart Fan Control [Disabled]
Allows you to enable or disable CPU Smart Fan Control. Configuration options:
[Enabled] [Disabled]
The following sub-items appear only when you set
CPU Smart Fan Control
to
[Enabled].
Fan Control Mode [Manual Mode]
Configuration options: [Manual Mode] [Thermal Cruise Mode] [Speed Cruise
Mode] [Smart Fan IV Mode]
The following item appears only when you set Fan Control Mode to [Manual
Mode].
PWM/DC Voltage Output [255]
Sets the voltage allocated for Fan Control. Input value range: [0~255]
The following items appear only when you set Fan Control Mode to [Thermal
Cruise Mode].
Temperature Source [CPUTIN]
Allows you to select the temperature source. Configuration options: [SYSTIN]
[CPUTIN] [AUXTIN0] [AUXTIN1] [AUXTIN2] [AUXTIN3] [SMBUSMASTER
0] [SMBUSMASTER 1] [SMBUSMASTER 2] [SMBUSMASTER 3]
[SMBUSMASTER 4] [SMBUSMASTER 5] [SMBUSMASTER 6]
