A-TS
87
https://a-ts.cn/en/
10. Parameter profiles
“○”: Indicate the set value of the parameter can be changed when
the inverter is in stop status or running status.
“×”: Indicate the set value of the parameter cannot be changed
when the inverter is in running status.
“*”: It represents the value of this parameter is the actually
measured value and cannot be changed.
“-”: It indicates that the parameter is "Factory default parameter"
set only by the manufacturer and forbidden for users to change.
“Address” is the address of MODBUS protocol register
F0 Group: Basic Function Parameters ( total 15 items )
Code
Name
Setting Scope
Min
Unit
Defaulte
d Value
Addres
s
Chang
e
P0.0
0
Command
channel
0:Keypad
command
channel
1:Termminal
control
2:Serial
communicatio
n port control
1
0
000H
○
P0.0
1
Reserved
-
-
-
001H
*
