User Manual CLASSIC 514
August 2023
File: User Manual_CLASSIC 514_rev5.docx
11
3.2.3 Reflecting surfaces
To avoid danger from reflected direct and scattered radiation, there must be no reflective
surfaces in the room.
These can be:
•
Mirrors
•
Pictures behind glass
•
Chrome surfaces
•
Windows
These surfaces must be removed or suspended or matted. In the area of laser use, only
matted, non-reflective and non-flammable instruments and materials should be used.
3.3 Electrical connection
The laser is operated with a DC voltage of 24 V. The power is supplied by an external
power supply. The power supply unit can be connected to an AC voltage ranging from
from 100 V
– 240 V (50/ 60 Hz).
The power connection is made via the table column and the supplied connector.
Make sure that the plug is accessible at any time so that the laser can be disconnected
from the mains after use.
