A.O. Smith TWI 35-200, Installation, User And Service Manual

Page: 57 / 92

10 Settings
10.1 Display
The display is completely menu-driven and enables the user to change settings and to
verify the status and history of the water heater.
For more information about how to use the display, refer to Operator interface (see 3).
On the display, press [MENU] to enter the main menu.
Fig. Main menu
BACK
Appliance Status
>
> Appliance Information
Error (none)
> Error Occurrence
Restore Default
Error History >
>
Temperatures
Display Settings
>
>
The main menu consists of 8 submenus. Use the scroll bar on the right side to scroll
through the menu.
Press on a line with a [>] to open that specific submenu. Press [BACK] to return to the
previous screen.
10.2 Temperatures
The Temperatures submenu shows the temperature setpoint, the set hysteresis and the
actual water temperature in the water heater.
Fig. Temperature submenu
35°C
BACK
Operating Setpoint
Hysteresis
Tank Temperature
65°C >
5°C >
0313279_TWISTER II_UKUK_
V1.1, 18-02-2019
57