5
Operation controls & Functions
Front Panel
q
POWER LED:
This power LED will illuminate when receiving power from the transmitter.
w
OPTICAL IN:
Connects with an optical audio source as an optical audio return which
sends audio to the Transmitter.
e
IR IN 1:
IR IN 1 is considered an IR receiver which connects to the supplied IR Receiver
cables for IR signal reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
r
IR OUT 2:
IR Out 2 is considered an IR BLASTER which connects to the supplied IR
Blaster cable for IR signal transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
t
RS-232:
Connects to the device that is to be controlled (via RS-232 terminal connected
with a D-Sub 9-pin cable) by ASCII commands.
y
UPDATE:
When updating the firmware, the switch should be moved to the left side. As
indicated by the arrows on the case.
