5
Operation controls & Functions
Transmitter
front back
q
DC 48V:
Plug the 48V DC power supply into the unit and connect the adaptor to an AC outlet.
w
IR1 BLASTER:
Connect to the supplied IR Blaster cable for IR signal transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
e
IR2 EXTENDER:
Connect to the supplied IR Extender cables for IR signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
r
CAT5E/6/7 OUT:
Connect to the Receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.
t
HDMI IN:
Connect to HDMI source equipment such as a DVD or Blu-ray player.
y
STD/UPDATE SWITCH:
This switch is reserved for factory use only.
u
RS-232 IN:
Connect to a PC or Laptop with D-Sub 9-pin male cable for the transmission of RS-232 commands.
i
LAN:
Connect to an internet or network system.
o
POWER LED:
This LED will illuminate when the device is connected to a power supply.
a
LINK LED:
This LED will illuminate when both Transmitter and Receiver are connected through CAT cable. When it blinks regularly it
states the Transmitter is NOT sending signal but the Transmitter and Receiver are linked and if it blinks irregularly it states an error has
occurred.
A
NEU
VIDEO
