smartTV installation guide
1. Getting started
-
Connect the Power adapter from smartTV to
power outlet.
-
Connect the HDMI cable from smartTV to your
TV.
-
Connect the Ethernet cable from smartTV to
your xDSL modem.
-
Turn power ON and finish the setup with setup
wizard which will be run once after first boot.
(Cables are not included in package)
NOTE! If you want to use smartTV wireless (WLAN),
you can connect A-Link WNU(m) to USB slot.
2. USB slots and SDcard
-
You can connect USB memory or SDcard to device slots on product side
frame.
-
The hatch on product can be pulled out and you can connect miniUSB
device for example A-Link WNU or BlueUSB21 to the internal USB slot.
3. Remote control
1.
Power button (Power off), you can turn off smartTV.
2.
Status LED, let you know when wireless RF connection is
active between remote control and smartTV.
3.
Wireless mouse right side button, you can get back from
menus (Cancel).
4.
Wireless mouse left side button, you can choose an item or
accept your choice (OK).
5.
Wireless mouse activation button, you can activate the
mouse by quickly double-click the button.
-
Wireless mouse will work by moving the remote control to different directions and pointed
it to your television screen.
(Remember to activate the mouse first by double-click the activation button)
NOTE!
−
You can find more instructions and tips from
http://www.a-link.com/uk/smartTV/
−
Update the latest firmware by “Settings → Privacy → Update system online”. (SDcard needed)
Product is directive 1999/5/EY approved (CE).
smartTV, multimedia PC for your TV, EAN / Order code: 6 418949 03150 6
European warehouse, warranty and support:
A-Link Ltd, Kylavainiontie 20, 02760 Espoo
Technical support: +358 600 41020 (2,70€ / min + local network fee)
Internet support:
