background image

A.H. Systems Model Active Monopole Antennas 

 

 

 

 

©

 A.H. Systems inc

 

REV E 

5

 

 

SPECIFICATIONS

 

 

GENERAL DESCRIPTION 
 

The A.H. Systems active monopole antennas are active, general-purpose, 
receive-only antennas which cover the 100 Hz – 60 MHz frequency range. They 
are ideal for instantaneous bandwidth scanning (without tuning) of electric fields 
in its frequency range and can drive any receiver with an input impedance of 50 

. Each unit comes with a telescoping rod, ground plane with a high impedance 

matched preamplifier and battery charger. Review this manual and become 
familiar with all safety markings and instructions. Verify that the antenna 
impedance is compatible with the receiver impedance.

 

 
 

ANTENNA SPECIFICATIONS 

  

SAS-550-1B Active Monopole Antenna specifications: 
 

Frequency Range  ............................................................................ 9 kHz – 60 MHz 
Antenna Factor ............................................................................................... 0 dB/m 
Flatness .................................................................. +/- 0.5 dB from 20 kHz– 30 MHz 
 ................................................................................................. 

 +/- 5 dB whole range 

Sensitivity ................................................................................... 5 dB

V/m @ 10 kHz 

 ................................................................................................. 

-20 dB

V/m @ 1 MHz 

Dynamic Range ................................................................................96 dB @ 10 kHz 
 ........................................................................................................ 

122 dB @ 1 MHz 

Saturation .................................................................................................. 87 dBuV/m 
Output Connector Type .................................................................................... BNC(f) 
Input Power ......................................................................................... 12 Vdc Battery 
Weight ................................................................................................ 4.7 lbs. / 2.1 kg 
Size (W x H x D) ....................................... 18" x 18" x 41" (46 cm x 46 cm x 104 cm) 
 

 
SAS-550-2B Active Monopole Antenna specifications: 
 

Frequency Range  .......................................................................... 100 Hz – 60 MHz 
Antenna Factor ............................................................................................... 0 dB/m 
Flatness ................................................................... +/- 0.5 dB from 2 kHz – 30 MHz 
 ................................................................................................ 

+/- 24 dB whole range 

Sensitivity ................................................................................... 5 dB

V/m @ 10 kHz 

 ................................................................................................. 

-20 dB

V/m @ 1 MHz 

Dynamic Range ................................................................................96 dB @ 10 kHz 
 ........................................................................................................ 

122 dB @ 1 MHz 

Saturation .................................................................................................. 87 dBuV/m 
Output Connector Type .................................................................................... BNC(f) 
Input Power ......................................................................................... 12 Vdc Battery 
Weight ................................................................................................. 4.7 lbs / 2.1 kg 
Size (W x H x D) ....................................... 18" x 18" x 41" (46 cm x 46 cm x 104 cm) 

 

 

 

Summary of Contents for SAS-550-1B















Reviews: