AMFLOW
®
A2 ACM Installation, Operation & Service Manual
STANDARDS & CERTIFICATIONS
Copyright
©
2015 A & H Enterprises, Inc. All rights reserved
US & INTERNATIONAL PATENTS PENDING
00000222-0904-000 * Rev. C, 09/15
Page 33 of 35
STANDARDS
A&H Enterprises designs its products to meet the applicable
ASME,
and
API
standards for valve design and
pressure vessels.
Products are also
CE
marked and
ATEX
approved for Hazardous area installations.
MEMBERSHIPS
CERTIFICATIONS
ATEX DIRECTIVE (94/9/EC)
In the interest of safety and quality, A&H Enterprises has certified its
Amflow
®
series of actuators for use in
potentially explosive atmospheres as defined by the ATEX Directive (94/9/EC) as Category 2G.
ATEX
II 2 G Ex de IIC T4
US & INTERNATIONAL PATENTS PENDING
To ensure the safety of all parties, only genuine
Amflow
®
parts must be installed in accordance with supplied
instructions, good engineering, and construction practices. The actuators must not be modified in any way from
the original purchased actuators. The actuators must only be operated in the conditions indicated on product data
sheet. This equipment is certified for Group 2 Category II. Equipment should not be used in systems requiring a
higher level of certification.
