Manually Provision a Yealink T23P or T46G Phone without GUI
Objective
To manually provision a Yealink T23P or T46G phone. Please note that it is best practice to perform a factory reset
when manually provisioning a phone.
Applies To
• Yealink 23P and T46G devices
Procedure
Provisioning a Yealink T23P Phone
1. On the phone, go to
Menu
>
Settings
>
Advanced Settings
.
• Use admin or the MAC password when prompted for a password. Change Password mode from
abc
to
2aB
,
especially when entering MAC password.
2. Select
Reset to Factory
. The phone should now reset to factory default settings.
3. Once the phone reboots, go to
Menu
>
Settings
>
Advanced Settings
.
•
Password
: admin
4. Select
Auto Provision
. Enter the provisioning server address:
Note:
For ":" or "/" enter the * key multiple times.
5. Press
Save
and click
OK
to confirm.
6. The phone will auto-restart after 20 seconds, or you can restart the phone manually at any time.
7. If the phone was previously activated, it should come online. If not, move on to the next step and activate the
phone.
Updated: Fri, 17 Apr 2020 08:18:01 GMT
Powered by
1
