150Mbps Wireless Broadband Router
User Manual
33
4.3.2.
Add a New Device
Enter the new device’s PIN: This code can mark a wireless product.
Press the button of the new device in two minutes: New device will send a PIN code to
wireless router.
WPS can connect the wireless adapter and the router in a safe way. If you have a wireless
network card which has WPS button, you may set up a safe network via the following methods.
Method 1:
1. Push the WPS button in the Router until the WPS LED is flashing several times.
2. Push the WPS button in the wireless network card for about 3-5seconds.
3. The safe connection will be established automatically.
Method 2:
1. Input the PIN code of the adapter’s WPS page into the router’s WPS configure page, then
click ’connect’.
2. Push the ‘PIN Input Config (PIN)’ in the Wi-Fi protect setup of the adapter
3. Select this router in the pop-up window, then click ‘Select’
4. The connection between the adapter and the router is be established automatically.
Method 3:
