8e6 Technologies TAR User Manual Download Page 67

Page: 67 / 222

ONFIGURATION

ECTION

HAPTER

2: C

USTOM

AUGE

ETUP

, U

SAGE

6 T

ECHNOLOGIES

HREAT

NALYSIS

EPORTER

SER

UIDE

When adding a gauge group, you need to do the following:

• Name the gauge, and specify limit and timespan values

• Synchronize all library categories from the source R3000

with the TAR unit

• Select library categories for the gauge to monitor

• Assign user groups whose end users’ Internet/network

activity will be monitored by the gauge

• Verify limit values for library categories included in the

gauge, and specify the library category method(s) to be
used by the gauge

Add Gauge Information

In the Gauge Information box:

1. Type in at least four characters for the

Gauge Name

using upper and/or lowercase alphanumeric characters,
and spaces, if desired.

2. Type in the

Lower Limit Value

of the floor for any gauge

activity. The recommended value is

(zero).

3. Type in the

Upper Limit Value

of the ceiling for gauge

activity. The recommended value is

200

. This can be

adjusted after using TAR for awhile and evaluating
activity levels at your organization.

4. Type in the

Timespan in minutes (1-60 Only)

for

tracking gauge activity; usually

minutes. The

timespan will always keep pace with the current time
period, so that if a timespan of 15 minutes is specified,
the gauge will always reflect the most recent end user
activity from the past 15 minutes.

Summary of Contents for TAR































































































































































































































Search results

Summary of Contents for TAR

Reviews:

Brands by name

Popular brands

8e6 Technologies TAR, User Manual

Search results

Summary of Contents for TAR

Reviews:

Brands by name

Popular brands