manualshive.com logo in svg

8e6 Technologies TAR, User Manual

Share
Download
8e6 Technologies TAR User Manual Download Page 52

P

RELIMINARY

 S

ETUP

 S

ECTION

    

C

HAPTER

 2: A

DMIN

 G

ROUPS

 S

ETUP

40

8

E

6 T

ECHNOLOGIES

, 

T

HREAT

 A

NALYSIS

 R

EPORTER

 U

SER

 G

UIDE

View Account Info

The following entries saved for the administrator’s account 
display in the Account Info frame: Employee Name, Work 
Phone, Email address, TAR Login, User Groups.

Additionally, if any of the following optional entries were 
saved for the administrator’s account, these also display: 
Home Phone, Location information, LDAP Username, 
Domain, Comments.

NOTES

: By default, the Administrator Group pull-down menu 

displays the first alphanumeric entry in the list—this does not 
reflect the selection saved for the group administrator’s profile.

The global administrator profile that was created during the quick 
start wizard hardware installation process displays at minimum 
the TAR Login ID and Email address. For this profile, the Admin-
istrator Group field does not display and the User Groups list box 
is empty, since this administrative account receives email alerts 
about maintaining the TAR unit, and does not manage user 
groups.

Summary of Contents for TAR































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands