8e6 Technologies TAR User Manual Download Page 33

Page: 33 / 222

RELIMINARY

ETUP

ECTION

HAPTER

1: U

SER

ROUPS

ETUP

6 T

ECHNOLOGIES

HREAT

NALYSIS

EPORTER

SER

UIDE

Add a User Group

To add a new user group:

1. From the User Groups list box, select an existing user

group to be used as the base group for creating the new
user group.

2. Click

New Group

to display the panel for adding a user

group:

Fig. 2:1-3 Add user group, Patterns tab

This panel for adding a user group is comprised of the
Group Name field at the top, and the following tabs popu-
lated with information from the base group: Patterns, IP
Ranges, and Single Users. By default, the Patterns tab
displays.

3. Make entries in any of the tabs—as described in the tab

sub-sections on the following pages.

4. Enter at least three characters for the

Group Name

to be

used for the new user group; this action activates the
Save button.

Summary of Contents for TAR































































































































































































































Search results

Summary of Contents for TAR

Reviews:

Brands by name

Popular brands

8e6 Technologies TAR, User Manual

Search results

Summary of Contents for TAR

Reviews:

Brands by name

Popular brands