manualshive.com logo in svg

8e6 Technologies TAR, User Manual

Share
Download
8e6 Technologies TAR User Manual Download Page 172

A

DMINISTRATION

 S

ECTION

    

C

HAPTER

 7: V

IEW

 H

ARD

 D

ISK

 S

TATUS

160

8

E

6 T

ECHNOLOGIES

, 

T

HREAT

 A

NALYSIS

 R

EPORTER

 U

SER

 G

UIDE

Chapter 7: View Hard Disk Status

This chapter explains how the global administrator views 
the hard disk status on a TAR-SL, TAR-HL, or TAR-H server 
with RAID.

1. In the navigation panel, click Administration to open that 

menu.

2. Click Hardware Detector to open the Hardware Detector 

window:

Fig. 5:6-6  Hardware Detector, hard disks OK

NOTE

: If the TAR server is a TAR-S or TAR-MSA unit, when 

clicking Hardware Detector, the following message displays in a 
pop-up box: “This is not a RAID box!” Click the “X” in the upper 
right corner to close the pop-up box.

If no hard disk failure has been detected on the TAR 
server with RAID, the status of each hard drive displays 
as “OK” and the following message displays at the 
bottom of the window: “All harddisks are working prop-
erly.”

If a hard disk failure has been detected, the affected hard 
drive image displays in red with the message “FAIL,” and 

Summary of Contents for TAR































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands