8e6 Technologies TAR User Manual Download Page 140

Page: 140 / 222

DMINISTRATION

ECTION

HAPTER

1: C

USTOM

ATEGORY

AINTENANCE

128

6 T

ECHNOLOGIES

HREAT

NALYSIS

EPORTER

SER

UIDE

Add a Custom Category

1. Click

New Category

2. Enter up to seven characters for the

Category Name

This entry automatically displays in uppercase charac-
ters.

3. Enter the

Description

for the category.

4. Click in any of the checkboxes to display the corre-

sponding elements below:

Fig. 5:1-3 New custom category

• URL - clicking this checkbox displays the URL field,

and “URLs” tab below.

• URL with wildcard - clicking this checkbox displays the

URL with Wildcard (*) field, and “URLs with * ” tab
below.

• Search Engine Keyword - clicking this checkbox

displays the Search Engine Keyword field, and
“Keywords” tab below.

Summary of Contents for TAR































































































































































































































Search results

Summary of Contents for TAR

Reviews:

8e6 Technologies TAR, User Manual, Page: 140 / 222

Search results

Summary of Contents for TAR

Reviews: