8e6 Technologies HL-002-006 Quick Start Manual Download Page 20

Page: 20 / 94

6 e

nterprise

eporter

uick

tart

uide

Check the Power Supply

This server is equipped with a universal power supply that handles 100-240 V, 50/60 Hz.

A standard power cord interface (IEC 950) facilitates power plugs that are suitable for

most European, North American, and Pacific Rim countries.

Power Supply Precautions

Warning:

Use a regulating uninterruptible power supply (UPS) to protect the server from power

surges, voltage spikes and to keep the server operating in case of a power failure.

In geographic regions that are susceptible to electrical storms, 8e6 highly recom-

mends plugging the AC power cord for the server into a surge suppressor.

Use appropriately rated extension cords or power strips only.

Allow power supply units to cool before touching them.

•

Summary of Contents for HL-002-006































































































Search results

Summary of Contents for HL-002-006

Reviews:

Brands by name

Popular brands

8e6 Technologies HL-002-006, Quick Start Manual

Search results

Summary of Contents for HL-002-006

Reviews:

Brands by name

Popular brands