7th Sense Juggler 1, User Manual

Page: 34 / 44

34
M611-1 Operating Juggler 1 Pixel Processor : User Guide © 2022 7thSense
Juggler Care and Maintenance
Juggler Care and Maintenance
Environment
Juggler is intended for use in a commercial (not domestic) environment and should be operated in a
clean, dust free area (e.g. a server room). It is intended for operation in benign environments (not
subject to corrosive or explosive atmospheres, moisture or flammable gases). Units are not protected
against ingress of liquid (IPx0) or designed to be subject to excessive mechanical shock or vibration.
Only used at altitude not exceeding 2000 m
Only used in not-tropical climate regions
Thermal
Do not block any of the unit’s air vents and ensure the ambient temperature around the Juggler is
compatible with the environmental characteristics stated in the
Physical Specifications .
Particularly when mounted in a rack cabinet with front or rear doors the ambient temperature around
the unit may be higher than the ambient room temperature.
Electrical
Before connecting power to the unit, ensure the electricity supply is compatible with the electrical
ratings shown in this document and on the unit’s product label. The unit shall not be connected to an
IT (unearthed neutral) power distribution system and the mains socket-outlet used shall connect to
the building installation ground.
Juggler is connected to and disconnected from the mains supply with the IEC 60320 power connector
on the rear of the unit.
The Juggler is protected by twin (live and neutral) fuses in the IEC mains connector block. These are
the only user-serviceable part of the Juggler. If either malfunctions, they must both be replaced by a
qualified person, and only by
F2A H250V, 5 × 20 mm ceramic cartridge fuses . Disconnect the Juggler
from the mains supply before releasing the clip with a suitable tool to withdraw the fuse drawer, and
replace both fuses. Push the drawer back in securely before reconnecting.
31