21
M611-1 Operating Juggler 1 Pixel Processor : User Guide
© 2022 7thSense
Rear Panel Connections
GPIO Genlock Example
Example: Use an input VSync
In the Juggler system, the first in line is designated as providing the source for genlock.
In Compere
This first Juggler’s GPIO:1 is set to be an
output
, using a video channel media input as its
source
, and
the
signal
it is sending as the V Sync is is receiving from this source (expressed as Rx:V Sync) (see
terms above).
Ø
Compere 1.0-5 User Guide: GPIO Properties
The next Juggler in line has its
GPIO:2
set to be in
input
, in other words, simply receiving from the
attached cable.
Its
GPIO:1
is set to be an output, using its GPIO:2 as its source (the signal need not be specified).
This is repeated down the line, the last of course not needing to be assigned a sending GPIO.
Connections
Five Jugglers would therefore be cabled as follows:
Summary of Contents for Juggler 1
