5DT Data Glove Ultra Series User Manual Download

Page: 7 / 60

3. Software Installation

Your package comes with a CD that contains documentation and utilities to help
you get up and running with the gloves as quickly as possible.

Most of the supplied programs and software are intended for 32-bit Windows,
and require Windows 98, ME, 2000, or XP.

The setup program should run when you insert the CD, but if it doesn’t, run the
program

setup.exe

in the

install

directory and follow the on-screen instructions.

When prompted, check the 5DT Data Glove Ultra box to install the software for
this product.

3.1. CD Contents

The CD contains the following directories:

…\Acrobat

This copy of Adobe

Acrobat

Reader will allow you to read the documentation.

…\DirectX

The CD-ROM also contains the redistributable version of DirectX 9.0. You will
need this if you want to run the DirectX implementations of the Glove Demos
(DirectX and OpenGL demos are supplied). To install DirectX 9.0, open the
folder and run

dxsetup.exe

…\Install

This contains the software installation files.

Summary of Contents for Data Glove Ultra Series





























































Search results

Summary of Contents for Data Glove Ultra Series

Reviews:

Related manuals for Data Glove Ultra Series

Brands by name

Popular brands

5DT Data Glove Ultra Series, User Manual

Search results

Summary of Contents for Data Glove Ultra Series

Reviews:

Related manuals for Data Glove Ultra Series

Brands by name

Popular brands