5DT Data Glove Ultra Series, User Manual, Page: 14 / 60

10
Figure 10 – The Tab Bar with Two Gloves Open
You may switch between open gloves by clicking on either of the Glove Tabs.
4.4. The Graph View
The following information fields are available in Graph View:
•
Menu bar
•
Toolbar
•
Tab bar – Allows you to tab between gloves
•
Sensor graph – A real-time graph of the glove sensor
•
Sensor name and values – Displays the sensor name and the following
real-time values (the amount of information displayed is dependent on
the resolution available):
o
Raw sensor value [Value between 0 and 4095]
o
Sensor dynamic range [Value between 0 and 4095]
o
Scaled sensor value [ Scaled value from 0 to 4095]
o
Lower calibrated value [Value between 0 and 4095]
o
Upper calibrated value [Value between 0 and 4095]
o
Graph top value [Value between 0 and 4095]
o
Current graph value [Value between 0 and 4095]
o
Graph bottom value [Value between 0 and 4095]
•
Status bar – Displays status information, such as:
o
Program status and information messages
o
The packet rate
o
An indication if recording is currently on
o
An indication if auto calibration is currently on
o
The model of the current glove
o
The handedness of the current glove
o
An indication if the current glove is wired or wireless
o
The firmware version of the current glove