23
CAUTION
Do not use hoses such as rubber or PVC hose which are not resistant to
chemicals or disinfectants or insufficient flexibility. Only use PVC flexible
spiral hoses with integrated spiral or hoses of equivalent material
3.7.
Suction inlet hose connection
•
Remove the cover of suction inlet and push-in tubing connector in the inlet hole
•
Connect suction inlet hose (Ø40mm spiral hose) at tubing connector and tighten
with teflon insulation tape
3.8.
Waste outlet hose connection
-
Always use spiral hose with Ø20mm
interior
-
Connect hose to the outlet hole with
clockwise
-
Please be tighten with teflon
-
Always be higher position than
drainage
3.9.
Exhaust air hose connection
•
Turn left exhaust air outlet hole clamp
•
Connect exhaust air outlet hose to the hole (strongly push-in)
•
Turn right exhaust air outlet hole clamp for fasten
•
Always place end of the outlet hose out of building or window to prevent noisy
problem, hot temperature and bad odor
RAIN1/RAIN1C
Summary of Contents for RAIN1
