4RF Aprisa LTE User Manual Download Page 47

Page: 47 / 248

LTE Router Installation | 47

Aprisa LTE User Manual 2.1

Software Upgrade

This upgrade process is for upgrading the software on a single Aprisa LTE.

SuperVisor Software Upgrade Method

The LTE software can be upgraded by loading the software file *.4nu from an external directory using the

file transfer process (see ‘

Software > File Transfer

’ on page

210

) and activated (see ‘

Software > Manager

’

on page 212).

To load and activate Aprisa LTE software:

1. Download the software file *.4nu into your computer.

2. Login to SuperVisor and go to Software > File Transfer. The method is set to HTTPS.

3. Click Start Transfer.

4. Browse to the *.4nu software file stored on your computer.

The software release file will be transferred to the LTE Available Software Pack location and the file
integrity verified.

If the file transfer fails, check the Events History Log page (see ‘

Events > History Log

’ on page

194) for

more details of the transfer.

Activate the software on the Aprisa LTE (see ‘

Software > Manager

’ on page

212). The router will reboot

automatically.

Summary of Contents for Aprisa LTE

























































































































































































































































Search results

Summary of Contents for Aprisa LTE

Reviews:

Related manuals for Aprisa LTE

Brands by name

Popular brands

4RF Aprisa LTE, User Manual

Search results

Summary of Contents for Aprisa LTE

Reviews:

Related manuals for Aprisa LTE

Brands by name

Popular brands