HIB-DNO V1.1 05/22
Page 2
©4QD Ltd www.4qd.co.uk
1. Description
The HIB-DNO is an adaptor board designed to allow a 5V hall effect
throttle to be used with our DNO controllers.
2. Mounting
The HIB-DNO goes in the wiring between the throttle and the DNO. It is enclosed in
heat shrink tubing and can either be left free floating, or can be secured with a
cable tie or double-sided tape if required.
3. Connections
The HIB-DNO
should be connected as per this diagram…
