4O3A Station Genius v2, User Manual, Page: 39 / 52

2. CAT Configuration
SG supports reading CAT directly form there radios in the current version:

Yaesu FT-1000MP

Yaesu FT-2000

Yaesu FT DX 3000

Yaesu FT DX 5000

Yaesu FT DX 9000

ICOM IC-7000

ICOM IC-7800

ICOM IC-775

Elecraft K3

Kenwood radios
Station Genius supports getting band data FlexRadio SDRs,
but does so over the computer network rather then over traditional CAT protocols
CAT Type defines the low level details of the CAT protocol. They differ greatly between
manufacturers.
CAT Baud defines the communication speed. This parameter is by the user on the radio,
so it needs to be matched on SG.
BCD Out is used to forward CAT data to other devices in the shack that use it.
CAT INPUT port is RS 232-1 , and CAT FORWARD port is RS232-2 .
⬆
Back to table of contents Page 39