4O3A Signature – Antenna Genius User Manual
Page
46
of
56
9.8.7. Bands Range Configuration
Like in the previous version you can fully
customize your band ranges.
Note you have 4 custom bands at the bottom of
the table.
The frequency ranges are relevant when using
FlexRadio as band source only.
BCD and PTP modes are fixed – you only select
the band by a fixed number instead of reading
frequency data.
9.8.8. FlexRadio
Click on the
FlexRadio
button under
Bands.
Click the
Serial Number
field and your FlexRadio
will be discovered automatically and listed below:
Set
Antenna:
option to assign the desired Flex antenna port to Port A and Port B, respectively.
Set
PTT:
option to assign the desired Flex PTT source to Port A and Port B, respectively.
