4next EasyNET User Manual Download Page 4

Page: 4 / 23

SAFETY INFORMATION

Technical features

CPU

I/O

32b Arm® Cortex®-M4 MCU+FPU

Signalling LEDs

2MBytes Flash ROM

N. 1 Ethernet 10/100 Mb/s port

1 MBytes RAM

N. 1 galvanically isolated RS485 serial
port (on terminal)

Internal buffered RTC

MECHANICAL

ENVIRONMENTAL

Plastic case IP21 for DIN rail

Operating temperature: -20°C ÷ 60°C

Dimensions: 70 x 90 x 60 mm, 4 DIN
modules

Relative humidity: from 0 to 80% without
condensation

SD card insert connector

POWER SUPPLY AND CONSUMPTION

MODEM

Power supply: 10-32VDC

LTE Cat M1/NB1 (2G, 4G and NB-IoT)
Fallback GSM/GPRS

Average consumption: < 3W

Integrated SIM card module

Emails and Telegram messages of alerts

SOFTWARE

Modem RTU/TCP Master/Slave

Data mirroring to remote Modbus
servers

Configurable data logger

The use of radio devices may be inappropriate near electronic equipment.

Do not install the EasyNET near medical devices such as pacemakers or hearing aids. EasyNET can
interfere with the proper functioning of these devices.

EasyNET must not be used on board aircraft.

Do not install EasyNET near oil stations, fuel depots, chemical plants, explosion sites as EasyNET can
disturb the operation of technical equipment.

EasyNET can generate interference if used near television, radio or personal computers.

In order to avoid possible damage, we recommend the use of accessories tested and specified as
compatible with EasyNET.

Summary of Contents for EasyNET
























Search results

Summary of Contents for EasyNET

Reviews:

Related manuals for EasyNET

Brands by name

Popular brands

4next EasyNET, User Manual

Search results

Summary of Contents for EasyNET

Reviews:

Related manuals for EasyNET

Brands by name

Popular brands