4ms Company STS User Manual Download

Page: 10 / 24

Saving after power-down

By now you should have a few different new samples recorded into a few different

slots. The WAV files themselves are saved on the microSD card, and the STS has

assigned each file to a bank/slot. You should be familiar how to play each sample

you just recorded by going to the bank and slot number on a play channel.

At this point, the

information telling the STS which sample

file is assigned to which slot in the bank is

not saved to the microSD card. Keep in

mind that the sample files themselves are

saved, but the STS is only temporarily

assigning them to the bank/slot you

recorded them into. To make this

temporary assignment permanent, you

have to save it.

To save the sample bank/slot assignment
information, hold down

Edit Sample

and

the left side

PLAY

for half a second. The

lights will flash a bit while it saves.

Notice the word “SAVE” above the left side

PLAY

button— it’s written in gold just like the

Edit Sample

button to remind you of the alternate feature of this button.

Why doesn’t the STS just save your sample slot assignment information automatically when you

record? The reason is that you might have recorded over a slot that you didn’t mean to, or you might

not like any of your takes and decide not to keep them. If this happens, you can either use the

Edit

Revert

Bank

feature (see

Edit Mode

section), or re-assign the slot using the

Edit+Next File

feature (see

Assigning

Samples section)… or just do nothing and the next time you power on the STS,

the samples will be back to the way you had them before.

Tutorial 4: Loading Files onto the microSD Card

The STS has an intelligent and intuitive sample file management

system. You can do everything in several different ways,

depending on your preferences: use a computer OS to move

files, or use the STS’s on-board assignment feature, or edit the

index file with a text editor (hackers only).

Unlike many other samplers, you never have to rename your files

for the STS. You can simply drag your sample files into folders

and the STS will load them into banks. This makes loading a

huge sample library a breeze.

Included with your STS is a SD Card adaptor that fits any

computer with a SD Card slot. If your computer lacks this slot,

you need to purchase a microSD to USB adaptor.

First, make sure the

Busy

light is off, and power down the STS.

Remove the microSD card and insert it into the adaptor in your

computer. The microSD card should show up as a drive on your

computer, similar to what’s shown on the right:

Each of these folders contains WAV files. Think of each folder as

a bank.

Page of

PLAY

Save

Edit

Sample

Edit

Sample

Hold both 0.5 sec

How it works

The STS never deletes or overwrites your files!

When you make a new recording, the STS
assigns the new WAV file to the sample bank/
slot selected by the

REC Bank

and

Sample

controls.  If  you  accidentally  record  into  a
bank/slot  that  already  has  a  sample  you
wanted  to  keep,  don’t  worry—  the  previous
sample  file  is  still  saved  on  the  card,  but  it’s

temporarily

not assigned to any sample slot. If

you don’t hit

Save

, then the old file will be

loaded next time you power on. Read the

Assigning Samples

section for more ways to

re-assign samples to slots.

Summary of Contents for STS

























Search results

Summary of Contents for STS

Reviews:

Related manuals for STS

Brands by name

Popular brands

4ms Company STS, User Manual

Search results

Summary of Contents for STS

Reviews:

Related manuals for STS

Brands by name

Popular brands