USER MANUAL|
VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
104
14
Open Platform Settings
The Open Platform settings in
terface contains information and configurable settings pertaining to the device’s
3xLOGIC VIGIL Software, deployment site and camera status. Advanced Camera settings commonly associated
with site setup can also be accessed from this interface.
14.1
Application
From the Application interface, a user can manually import and apply the latest VIGIL Server software package.
If the camera was setup using one of 3xLOGIC’s available Setup Tools (See Section 3), the latest VIGIL Software
will have been automatically applied.
Figure 14-1
Application Settings Interface
UPDATING VIGIL SOFTWARE
Steps:
Navigate to the Application Interface:
Configuration>Open Platform > Application.
1.
Click the Browse button next to the Application Packages field. A file explorer will deploy.
2.
Navigate to the location of the VIGIL Software package using the file explorer, select the file and
click Open.
3.
Click the Import button. The software should now automatically apply and begin running.
4.
Click the Start button (located under the Status table) to confirm the software is running. A pop-up
will deploy in the bottom-right corner of the window to prompt the user if the software is already
running.
5.
(Optional) Click the Log button to open an update log (text file) in a separate browser window.
14.2
3xLOGIC
From the 3xLOGIC settings interface, a user can view and configure information related to camera’s status,
deployment site and maintenance settings. Advanced settings commonly accessed during camera deployment
are also available for configuration.
If t
he camera was setup using one of 3xLOGIC’s available Setup Tools (See Section 3), these settings will have
been auto-configured to their recommended state.
STATUS
From the Status tab, a user can view general Camera Information, Camera Status information and Storage
Status information.