Chapter 2. Primary CLI Syntax Reference
28
3ware 9000 Series Serial ATA Controller CLI Guide
Controller Object Commands
Controller object commands provide information and perform actions related
to a specific controller, such as
/c0
. For example, you use controller object
commands to see alarms specific to a controller, to create schedules for when
background tasks are run, and to set policies for the controller. You also use
the controller object command
/cx add type
to create RAID arrays.
Syntax
/cx show
/cx show
attribute
[
attribute
...] where attributes are:
achip|alarms|allunitstatus|autocarve|autorebuild(9550SX
only)bios|carvesize(9000 series)|diag|driver| drivesta-
tus|exportjbod|firmware|memory|model|monitor|
ondegrade(9500S series)|pcb|pchip|numports|numunits|
numdrives|rebuild(9000 series)|selftest(9000 series)|
serial|spinup|stagger|unitstatus|verify(9000 series)
/cx show all
/cx add type=<RaidType> disk=<
p:-p..
> [stripe=<
Stripe
>]
[noscan][nocache][group=<3|4|5|6>][autoverify][ignorECC]
RaidType = { raid0, raid1, raid5, raid10, raid50, single,
spare, jbod (7000/8000 only)} [name=
string
(9000 only)]
[storsave=<protect|balance|perform> (9550sx only)]
/cx add rebuild=
ddd:hh:duration
(9000 only)
/cx add verify=
ddd:hh:duration
(9000 only)
/cx add selftest=
ddd:hh
(9000 only)
/cx del rebuild=
slot_id
(9000 only)
/cx del verify=
slot_id
(9000 only)
/cx del selftest=
slot_id
(9000 only)
/cx set exportjbod=on|off (9000 only)
/cx set ondegrade=cacheoff|follow (9500S only)
/cx set spinup=nn (9000 only)
/cx set stagger=nn (9000 only)
/cx set autocarve=on|off (9000 only)
/cx set carvesize=[1024...2048] (9000 only)
/cx set rebuild=enable|disable|1..5 (9000 only)
/cx set autorebuild=on|off (9550SX only)
/cx set verify=enable|disable|1..5 (9000 only)
/cx set selftest=enable|disable [task=UDMA|SMART]
(9000 only)
/cx flush
/cx commit (Windows only. Also known as shutdown)
/cx start mediascan (7000/8000 only)
/cx stop mediascan (7000/8000 only)
/cx rescan [noscan] (Does not import non-JBOD on 7000/8000
models.