16
User’s Manual
3. Receiving window, to display content received from corresponding COM port.
4. Sending window, to input content to be sent to corresponding COM port.
5. Baud rate.
6. on/off control of COM port.
7. Interval time setting for COM automatically send operation.
8. Auto send operation selection.
9. Single send button.
10. Counts of received character number of COMA and COMB.
11. Format selection of content to be sent and received.
12. button for clearing the receiving data area.
3.2.3.2. Serial Port Self-test
The serial port function requires the docking station DC must be connected to
8~36V power supply. Check the Auto checkbox in the test software interface,
click the "SEND" button, and connect Pin2 and Pin3 of the COM1 (or COM2)
interface together via , then the receiving window will display the Received
data of the port. The received data is consistent with the sent data, indicating
that the serial port can communicate normally.
3.2.4.Using USB Ethernet (Optional)
Enter the settings and click "Network&internet" to enter the following interface,
find "Ethernet"
