Industrial Ethernet Switch User Manual
3onedata proprietary and confidential
64
Copyright © 3onedata Co., Ltd.
Check whether the port attributes set to Trunking are consistent, such as rate,
duplex mode, VLAN and other attributes.
3.
What's the difference between RING V2 and RING V3?
RING V2 and RING V3 are our company's ring patents. RING V2 only supports
single ring and coupling ring. RING V3 supports single ring, coupling ring, chain
and Dual_homing, and Hello_Time can be set to detect port connection status.
4.
How to deal with the problem that part of switch ports are impassable?
When some ports on the switch are impassable, it may be network cable, network
adapter and switch port faults. User can locate the faults via following tests:
-
Connected computer and switch ports keep invariant, change other
network cable;
-
Connected network cable and switch port keep invariant, change other
computers;
-
Connected network cable and computer keep invariant, change other
switch port;
-
If the switch port faults are confirmed, please contact supplier for
maintenance.
5.
How about the order of port self-adaption state detection?
The port self-adaption state detection is conducted according to following order:
1000Mbps full duplex, 100Mbps full duplex, 100Mbps half-duplex, 10Mbps full
duplex, 10Mbps half-duplex, detect in order from high to low, connect
automatically in supported highest speed.
14.3 Alarm Problem
1.
When the device alarms, except BlueEyes_II software nether alarm
information display area will display alarm information, is there any other
way to notify technical staffs?
When the device alarms, monitoring host computer buzzer will continue to emit
alarm sounds.
