IES2005
Unmanaged Industrial Ethernet
Switch Quick Installation Guide
3onedata Co., Ltd.
Front view and side view
Rear view, bottom view and top view
Attention before mounting:
Website:
Tel:
Fax:
Address:
This product is full 100M unmanaged DIN-Rail industrial
Ethernet switch. The model is IES2005 (5 100M copper ports
+ 1 12~48VDC/24VAC power supply)
Please check whether the package and accessories are intact
while using the switch for the first time.
1. Industrial Ethernet switch 2. Certification
3. DIN-Rail mounting attachment 4. Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District,
Shenzhen
www.3onedata.com
+86 0755-26702688
+86 0755-26703485
1.
2.
3.
4.
5.
6.
7.
DIN-Rail mounting kit
Power supply input terminal block
DIP switch
Grounding screw
Power supply input status indicator PWR
Copper port connection indicator
100M Ethernet copper port
Unit: mm
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below:
Check whether the DIN-Rail mounting kit that
comes with the device is installed firmly.
Insert the bottom of DIN-Rail mounting kit (one side
with spring support) into DIN-Rail, and then insert
【
Product Overview
【
Package checklist
【
Panel design
【
DIN-Rail Mounting
【
Mounting Dimension
】
】
】
】
】
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
12
-4
8V
DC
/2
4V
AC
FG
V-
