User manual
39
www.3onedata.com
MAC address binding step:
Step 1: fill in the MAC address in the MAC text box;
Step 2: fill in Vid on the text box for the Vlan Id;
Step 3: select the port in the port's drop-down box;
Step 4: click the "add" button.
This function is a kind of security mechanism, please carefully confirm the settings, otherwise please caution;
Please do not use the multicast address as the input address;
Please do not enter the reserved MAC address, such as the MAC address of the machine.
6.4.3 Spanning-tree
Spanning tree protocol is a two-level management protocol by selectively blocking network redundancy
link to achieve the purpose of eliminating network loop on the second floor, and at the same time it has a
backup link function. Here are three kinds of spanning tree protocol: STP (Spanning Tree Protocol),
RSTP (Rapid Spanning Tree Protocol), and MSTP (Multiple Spanning Tree Protocol).
There are two main functions of the spanning tree protocol: one is to use the spanning tree algorithm, in
the Ethernet network, to create a port for the root of a switch to generate a tree to avoid loop. Two is in the
Ethernet topology changes, through the spanning tree protocol to achieve the purpose of convergence
protection. Compared to the STP, RSTP in the network structure changes, the faster convergence of the
network; MSTP compatible with STP and RSTP, and better than STP and RSTP. It can not only fast
convergence, but also make the traffic flow along the different VLAN distribution, so as to provide a better
load sharing mechanism for redundant links.
6.4.3.1 Bridge setting
In the menu bar, click the "main menu", "layer 2 configuration", "spanning tree" and " bridge setting", into
the bridge configuration interface, the interface can be spanning tree configuration parameters.