User manual
38
www.3onedata.com
(Figure 6.4.2.1 )
MAC aging time configuration step:
Step 1: fill in time in the text box of the aging time of MAC;
Step 2: click the "Settings" button.
The address of the device is based on the MAC address of the switch, so the VLAN value of all the MAC values are 0;
The permanent static address is configured in the static MAC address port list, and the corresponding table entry is
required when the port changes;
The multicast address table is displayed in the IGMP listener table entry;
The aging time of the MAC address is 300 seconds. After the port is disconnected, the upper level program clears all the
corresponding port list items.
6.4.2.2 Static MAC
Static MAC manually set by the user, not aging. In the menu bar in order to click on the "main menu",
"layer 2 configuration", "MAC configuration", "static MAC" into the static MAC configuration interface, in
the interface, you can source MAC address binding.
(Figure 6.4.2.2)