CLI user manual
1
Chapter 1 Login Ethernet Switch
1.1 Configuration through console port
1. Connection switches to configure terminal
As shown in Figure 1.1.1, the establishment of the local configuration environment, only the
computer serial cable and connected to the Console port of the Ethernet switch.
(Figure 1.1.1)
This cable is used for connecting the switch Console port and the external monitoring
terminal equipment. One end is RJ45 eight core plug, the other end is the 9 hole plug (DB9).
Console RJ45 the switch socket head, the cable inner connecting line diagram as shown
below.
(Figure 1.1.2)
2. Configure terminal parameters
1) Turn the computer, on the Windows interface, click "Start/All
Programs/Accessories/communication", run a terminal emulation program to create a new
connection. The RS-232 port is connected to the computer. To take Hyper Terminal in
Windows XP for example, as shown in Figure 1.1.3, type in a new name of the connection in
a text box named "name", then click "OK" button.
