CLI user manual
14
Chapter 4 Bandwidth Management
4.1 Enter rate management view
Bandwidth allocation including:
1. Entrance velocity distribution;
2. The outlet velocity distribution;
3. Check the entrance rate configuration information;
4. Check the export rate of configuration information;
Table 4.1.1 in bandwidth management view:
Operating
Command
Description
bandwidth
management
Bandwidth
In view of the system under
4.2 Egress bandwidth configuration
By default, the egress bandwidths not limit.
Table 4.2.1
Egress bandwidth configuration:
Table 4.2.1
Operating
Command
Description
Egress
bandwidth
Config egrate
<portlist>
<
Bandwidth
>
<portlist>:1,3,5-10 or all
<Bandwidth>:
(128k,256k,512k,1M,2M,4M,8M,16M,32M,64M,128M,256M)
0: unlimited
Note: only the Gigabit Ethernet port can be set larger than
the bandwidth of 8M
Example: set the 1 port of egress bandwidth is 8M
Switch (Bandwidth) # config egrate 1 8M
[OK]
Example: set port egress bandwidth limit 0
Switch (Bandwidth) # config egrate 1 0
[OK]
4.3 Ingress bandwidth configuration
By default, Ingress bandwidth does not limit.
Table 4.3.1 Ingress bandwidth configuration:
Table 4.3.1
Operating
Command
Description
