User manual
32
corresponding to a port, if set, all data sent to this address will be forwarded to that port only, but the others could
not receive data. Static address is the MAC address does not age once it has been added, this address tables before
being deleted remains in effect, and not be restricted by maximum aging time. IES618-4D series supports up to 15
static multicast filtering.
Button [Add/Edit], [Delete] were used for add/delete static Multicast MAC address. Join port is used to
choice the transmit port of static MAC address, can point to 1 or more transmit port. Knock [Add], [Delete], static
MAC address will be updated. For example, add MAC address ―01-00-00-00-00-03‖ member is port 2
，
3
，
4.
Multicast MAC address is 1 of highest byte‘s low byte.
Configuration
Description
MAC Address
Valid multicast address, a multicast MAC address is high byte low for 1
Join Port
Select desired configuration port
Add
The configured static multicast address entries added to the list
Delete
Selected multicast address is a static entry in the list, click <Delete>, delete this entry
（
Figure 5.6.6
）
All none multicast address did not allow adding in this table and the format must according to
XX-XX-XX-XX-XX-XX, did not have space or other illegal character, otherwise, will be display warning
information.
（
Figure 5.6.7
）
5.6.3 QoS
QoS provides four internal queues, each queue supports four different levels of traffic, shorter persistence
time of high-priority data packets in the switch, supports lower latency for certain delay-sensitive traffic.
According to port ID, MAC address, 802.1p priority tags, DiONetServ and IP TOS, equipment can be abale to put
the packets to an appropriate level.